Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Door Panel

Model: Honda Civic MK 7 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Door trim panel

See other generations:
Video tutorial

The first step is to remove the cap located inside the handle of the opening lever and the trim of the handle: this will make the screws securing the panel accessible for removal. Then unclip the opening lever by disconnecting the relevant cable; next, unclip the pressure clips along the edges of the panel using a flat screwdriver, taking care not to damage them; finally, disconnect the window switch connector to fully remove the panel.

Reverse the process for reassembly.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Honda Civic (2006-2012 / MK 8) Learn how to remove the door trim panel to access its interior or to replace it. Remove the window switch panel and disconnect the electrical connect…
Honda Civic (2012-2015 / MK 9) Remove the small plastic cover near the opening handle and unscrew the bolt underneath. Repeat the same procedure with the bolt that secures the cove…
Honda Civic (2016-2021 / MK 10) Today, in this video tutorial, you will see how to remove the rear door panel on a 2016 Honda Civic. First, open the rear door and remove the triangu…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos