Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Brake Discs and Callipers

Model: Honda Accord MK 7 - Years 2002-2007
Part: Brake rotors

Lift the vehicle on suitable car stands and remove the rear wheel; then disconnect the handbrake cable from the brake calliper and the oil pipe, ensuring to block the oil flow by inserting a small tube into the connection eyelet. Proceed to remove the brake calliper, extract the brake pads, and detach the calliper support; then move on to removing the disc by unscrewing the fixing bolt on the hub using a impact screwdriver. Fit the new disc after cleaning it of protective oil residues; install the new brake calliper support, the new pads, and then the new calliper, reconnecting the handbrake cable and the oil pipe. Bleed the system to eliminate any air bubbles.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Pads and Discs
Replacing Brake Pads and Discs
Honda Accord (2002-2007 / MK 7) The braking system of the car is a fundamental component for the safety of the driver. The brake discs are very important for both braking power and …
Replacing Brake Discs
Replacing Brake Discs
Honda Accord (2008-2013 / MK 8) The brake discs of a car are essential for the safety of every driver. First, lift the car with a jack and remove the wheel, unscrewing the wheel bol…
How to Replace Front Brake Pads on a Honda Accord 8
How to Replace Front Brake Pads on a Honda Accord 8
Honda Accord (2008-2013 / MK 8) In this video tutorial, you can see how to replace the front brake pads on a Honda Accord 8 by following some essential steps: first, purchase new br…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos