Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads and Discs

Model: Honda Accord MK 7 - Years 2002-2007
Part: Brake rotors

The braking system of the car is a fundamental component for the safety of the driver. The brake discs are very important for both braking power and vehicle handling. To proceed, lift the car off the ground and remove the wheel after unscrewing the wheel bolts. Once the bolts are removed, you can easily unscrew the brake caliper. With the help of a screwdriver, remove the brake pads without damaging the disc. Once the discs are carefully removed, you can remove the rust without damaging the various components before inserting the new disc.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Brake Discs and Callipers
Replacement of Brake Discs and Callipers
Honda Accord (2002-2007 / MK 7) Lift the vehicle on suitable car stands and remove the rear wheel; then disconnect the handbrake cable from the brake calliper and the oil pipe, ensu…
How to Replace Front Brake Pads on a Honda Accord 8
How to Replace Front Brake Pads on a Honda Accord 8
Honda Accord (2008-2013 / MK 8) In this video tutorial, you can see how to replace the front brake pads on a Honda Accord 8 by following some essential steps: first, purchase new br…
Replacing Brake Discs
Replacing Brake Discs
Honda Accord (2008-2013 / MK 8) The brake discs of a car are essential for the safety of every driver. First, lift the car with a jack and remove the wheel, unscrewing the wheel bol…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos