Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Automatic Gearbox Oil Replacement

Model: Honda Civic MK 8 - Years 2006-2012
Part: Transmission fluid

Replacing the automatic gearbox oil is a simple operation and very useful to maintain its proper functioning. If possible, lift the vehicle on appropriate axle stands or a hydraulic lift and remove the undertray. The gearbox is located on the passenger side and the drain plug is positioned on the engine side, at the rear. Position a suitable container and unscrew the drain plug. Once the draining is complete, clean the plug of any metallic residues and tighten it properly. Then access the engine compartment to refill the gearbox: the plug is located under the air filter housing.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Change
Engine Oil and Oil Filter Change
Honda Civic (2006-2012 / MK 8) It may seem like a complex task, but changing the oil is a straightforward process that can be completed in a few steps. First, lift the front of the…
Change Engine Oil and Filter
Change Engine Oil and Filter
Honda Civic (2006-2012 / MK 8) Changing the oil and filter is a task you can do yourself and is advisable to perform at least once a year, regardless of mileage. Start by removing …
How to Reset the Oil Change Light on a Honda Civic
How to Reset the Oil Change Light on a Honda Civic
Honda Civic (2001-2006 / MK 7) In this brief tutorial, we will see the entire procedure to reset the oil change light on a Honda Civic, seventh generation model produced from 2001 …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos