Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Mudguard on Your Car

Model: Honda Accord MK 7 - Years 2002-2007
Part: Accessory kit

This operation is relatively easy and requires about twenty-four minutes to install. Using a type of screwdriver, make three holes in the bodywork inside, behind the wheel. Remove the small cover and install the mudguard using the cover that was removed and three self-tapping screws measuring 5x25 millimetres. Perform the operation on the rear right side. Remove the three self-tapping screws. From the side of the rear inner wing, install the rubber grommets into the holes and fit the mudguard using three self-tapping screws. Repeat the same operation on the rear left side.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Front Number Plate Holder on a Honda Accord
How to Install the Front Number Plate Holder on a Honda Accord
Honda Accord (2018-2023 / MK 10) In today's video, see how to install the front number plate holder on the current series of the Honda Accord. Remember to be careful with the collisi…
Engine Oil Change in the Honda Accord
Engine Oil Change in the Honda Accord
Honda Accord (2012-2017 / MK 9) As usual, before proceeding with the engine oil change on your Honda Accord, secure the vehicle on a stable and safe surface, either on a ramp or fla…
Changing the Oil Filter and Engine Oil in a Honda Accord
Changing the Oil Filter and Engine Oil in a Honda Accord
Honda Accord (2002-2007 / MK 7) As you should do every time you want to perform maintenance on a car, place your Honda Accord in a stable and secure position, either on a ramp or on…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos