Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Adjustable Eccentric Joint

Model: Honda Accord MK 6 - Years: 1998, 1999, 2000, 2001, 2002
Part: Accessory kit

See other generations:
Video tutorial

Lift the vehicle on suitable car stands, remove the front wheel and then the shock absorber. Next, remove the nut securing the upper wishbone joint and use a forked lever to extract it from the hub support, also removing the rubber boot.

Using the appropriate puller and the corresponding pads, extract the joint from the wishbone. Mark the centre of the joint seat on the wishbone with a marker before installing the new adjustable eccentric joint.

Then fit the bushings into the joint seat and secure the new adjustable joint to the hub support.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Installation of Illuminated Sill Strips
Installation of Illuminated Sill Strips
Honda Accord (2008-2013 / MK 8) Installing illuminated sill strips along the inner edge of the door sill will give the vehicle a striking appearance: the operation is very simple an…
Fog Light Installation
Fog Light Installation
Honda Accord (2008-2013 / MK 8) Open the front bonnet, remove the plastic cover on the grille, and then the air ducts connected to the bumper grilles where the fog lights will be in…
Installation of Shaped Boot Mat
Installation of Shaped Boot Mat
Honda Accord (2002-2007 / MK 7) Applying a shaped mat inside the boot is a smart choice because these mats have a raised edge that helps contain any liquid spills, preserving the or…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos