Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Car Visors

Model: Honda Insight ZE3, ZE2 - Years 2009-2014
Part: Accessory kit

Car door visors allow you to enjoy a breath of fresh air even when the weather isn't ideal. They are made of a material that resists corrosion and does not fade. Installation does not require the use of a drill. The installation process is very simple and takes about half an hour of your time. Before proceeding, it is advisable to clean the surface of the window frame. Peel off about an inch of the adhesive tape, which is a special tape usually provided with the visor and is used specifically for its installation.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing Fog Lights
Installing Fog Lights
Honda Insight (2009-2014 / ZE3, ZE2) The operation shown in this guide takes about two hours to install and has a difficult level of difficulty. To proceed with this task, ensure the veh…
Replacement of the Internal Rear-View Mirror with Anti-Glare Model
Replacement of the Internal Rear-View Mirror with Anti-Glare Model
Honda Insight (2009-2014 / ZE3, ZE2) The internal rear-view mirror with automatic anti-glare function enhances comfort and safety during the night, as it prevents glare from the headligh…
Replacing the Vehicle Air Filter
Replacing the Vehicle Air Filter
Honda Insight (2009-2014 / ZE3, ZE2) This video illustrates how to replace the air filter, a fundamental component of the car's cooling system. The air filter housing in this model is lo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos