|
Do it yourself
| |||
| ||||
How to Remove Engine Oil and Change the Filter
Model: Honda Civic
MK 8
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012
Video tutorial
In this video, you will see how to remove engine oil and change its filter. First, ensure that the engine temperature is not too high; it is advisable to perform this task when the engine is cold. Use a spanner to remove the bolts securing the undertray beneath the engine compartment. Now locate the oil filter on the side (it has a cylindrical shape and is visibly different from other metal parts of the car). The oil filter is screwed onto the oil reservoir, and this is where you will start. Get a sufficiently large and deep container, locate the screw cap of the reservoir, and allow the oil to drain into the container for about ten minutes. It is recommended to wear disposable gloves to avoid getting oil on your hands and to protect yourself from any high temperatures of the oil. Once done, you can screw the cap back onto the reservoir to move on to the filter. Again, wear gloves and use the container to unscrew the entire filter structure counterclockwise. Allow the oil to drain for a few minutes and then screw in the new filter clockwise.
Updated on 9 February 2026 by ScegliAuto
Related tutorials
Honda Civic
(2006-2012 /
MK 8)
To change the engine oil and oil filter on a Honda Civic, follow these steps: Open the bonnet, go under the car, and locate the oil sump where you wi…
Honda Civic
(2016-2021 /
MK 10)
To replace the engine oil and filter in a Honda Civic, park the car on a flat surface and safely lift it to access the underside of the engine. Posit…
Honda Civic
(2006-2012 /
MK 8)
Here’s how to change the engine oil and filter on the Honda Civic MK8: open the filler cap, lift the vehicle, and remove the engine cover, then unscr…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.085
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |