Do it yourself
Frequently asked questions about cars and motorcycles

Removal and Replacement of the Oil Filter

Model: Honda Civic MK 8 - Years 2006-2012
Part: Oil filter

After draining all the oil from the sump, proceed to remove the oil filter. Use a strap wrench: tighten the strap around the base of the filter, which is positioned vertically and accessible from underneath the car. When unscrewing the filter, check for any residual oil still in the filter. Once the filter is removed, wait for all the oil to drain out, then proceed to install the new one: clean the seating where the filter screws in, lubricate the seal with oil, and refit it using the strap wrench.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Civic (2006-2012 / MK 8) Lift the vehicle with a jack and use axle stands to support it. Then, unscrew the drain plug from the oil sump (located at the rear of the sump, near…
Honda Civic (2012-2015 / MK 9) Lift the vehicle on suitable axle stands and position a container for collecting used oil under the oil sump: then undo the drain plug and wait for t…
Honda Civic (2006-2012 / MK 8) Changing the oil and filter is a task you can do yourself and is advisable to perform at least once a year, regardless of mileage. Start by removing …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos