Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Oil filter

See other generations:
Video tutorial

Drive the front wheels of the vehicle onto suitable ramps to facilitate access to the oil sump; place a wedge behind the rear wheel. Open the front bonnet and ensure it is securely supported, then pull out the oil dipstick.

Position a suitable container under the oil sump and unscrew the drain plug located at the rear corner of the sump, near the exhaust. Once the oil has drained, screw the plug back in. At this point, unscrew the oil filter and replace it with a new one after coating the gasket with oil. Finally, fill the engine with new oil according to the SAE specifications and the quantities indicated in the user and maintenance manual.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Changing Engine Oil and Oil Filter
Changing Engine Oil and Oil Filter
Honda Civic (2006-2012 / MK 8) Lift the vehicle with a jack and use axle stands to support it. Then, unscrew the drain plug from the oil sump (located at the rear of the sump, near…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Honda Civic (2012-2015 / MK 9) Lift the vehicle on suitable axle stands and position a container for collecting used oil under the oil sump: then undo the drain plug and wait for t…
Change Engine Oil and Filter
Change Engine Oil and Filter
Honda Civic (2006-2012 / MK 8) Changing the oil and filter is a task you can do yourself and is advisable to perform at least once a year, regardless of mileage. Start by removing …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos