Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing Deflectors on Door Windows

Model: Honda CR-V MK 4 - Years 2012-2017
Part: Accessory kit

To install deflectors on the car doors, first fully lower the windows. Then, using a spatula, carefully pry out the seal in the areas where the brackets for the deflectors will be inserted. Position the brackets correctly with care and reposition the seal. Before mounting the deflector, clean the edges of the doors with alcohol, paying particular attention to the surfaces where the deflector will be attached. Remove the outer tabs of the film covering the adhesive part of the deflector, until reaching the brackets previously positioned on the doors. Secure the ends, completely remove the film, and apply pressure to fix the deflector, which is now mounted.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of Bluetooth Device Adapter
Installation of Bluetooth Device Adapter
Honda CR-V (2007-2012 / MK 3) Installing a Bluetooth device adapter is straightforward and does not require special skills or tools. You must first remove the original radio to co…
Installing Car Mats
Installing Car Mats
Honda CR-V (2002-2007 / MK 2) The operation described in the following guide takes about 6 minutes and is of easy difficulty. Installing car mats protects the floor of your car fr…
Installation of Roof Bars
Installation of Roof Bars
Honda CR-V (2012-2017 / MK 4) The vehicle is already pre-equipped for installing roof bars, so you need to obtain the appropriate roof bars for the model of car they will be insta…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos