Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Driver's Side Power Window Switch on a Honda Brio

Model: Honda Brio MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

See other generations:
This video is currently unavailable

Replace the damaged or outdated power window switch on your Honda Brio. This is the switch for the driver, which controls all four windows. You can find this part for just under $8 on AliExpress, as shown in the video.

Remove the cover of the left front handle using a plastic trim tool. The entire cover will come off. The connectors are not easy to remove; use a flathead screwdriver to assist.

Next, take out the switch assembly with the buttons: there are four screws to remove. Take out the damaged unit and install the new, fully compatible one in its place.

Now, simply reinstall the four screws, reconnect the connectors, and put the handle cover back on with the switch assembly. Job done.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in the Honda Brio?
How to Replace the Battery in the Honda Brio?
Honda Brio (2018-2025 / MK 2) To replace the battery in the Honda Brio, open the hood to access the components in the engine compartment: on the right side, you will find the batt…
Where is the fuse box located on the 2021 Honda Brio?
Where is the fuse box located on the 2021 Honda Brio?
Honda Brio (2018-2025 / MK 2) The 2021 Honda Brio has two fuse boxes. The first box is located near the vehicle's battery, under the hood. The second box is located under the lowe…
How to Lower the Rear Seats of the Honda Brio
How to Lower the Rear Seats of the Honda Brio
Honda Brio (2018-2025 / MK 2) In this video, you will learn how to lower the rear seats of the Honda Brio. If you have a Honda Brio, you will appreciate its perfect adaptability f…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos