Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs in a Honda Civic?

Model: Honda Civic MK 10 - Years 2016-2021
Part: Tail light bulb

Replacing the rear light bulbs in a Honda Civic is a very simple task; let's see how to proceed in this tutorial. Start by opening the boot, then locate and unscrew the two fixing screws of the light positioned between the seal and the light itself. At this point, take the light and pull it outward to release the internal clips that hold it firmly to the bodywork. To remove a bulb, simply disconnect the connector and turn the bulb holder counterclockwise. Repeat the process for the opposite light if necessary.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light of the Honda Civic
How to Replace the Rear Light of the Honda Civic
Honda Civic (2001-2006 / MK 7) Today, in this video tutorial, learn how to remove and replace the rear light of the Honda Civic by following these simple and quick steps. First, op…
Replacing the Front Headlamp Bulb on a Honda Civic
Replacing the Front Headlamp Bulb on a Honda Civic
Honda Civic (2001-2006 / MK 7) Replacing the front headlamp bulbs on a Honda Civic? Let’s go through the disassembly of the components. Lift the front bonnet and detach the water r…
How to Replace the Front Headlight Bulbs on a Honda Civic
How to Replace the Front Headlight Bulbs on a Honda Civic
Honda Civic (2006-2012 / MK 8) Here’s how to replace the front headlight bulbs on a Honda Civic: open the bonnet by pulling the lever located at the bottom right of the dashboard a…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos