Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag on a Honda Accord?

Model: Honda Accord MK 9 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Airbag

See other generations:
Video tutorial

To remove the steering wheel airbag on a Honda Accord, loosen the screws located at the back of the steering wheel, on the right side and on the left side. Once these screws are loosened, slide the old airbag out of its housing to disconnect the connectors at its back.

At this point, connect the new airbag to the connectors and insert it back into its housing in the steering wheel. Then, secure it in place by re-tightening the rear screws.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Activate the Passenger Airbag in a Honda Accord
How to Activate the Passenger Airbag in a Honda Accord
Honda Accord (2008-2013 / MK 8) Today, learn how to activate the passenger airbag in an eighth-generation Honda Accord. First, open the front right door of your vehicle, as the airb…
Replacement of the front bumper of a Honda Accord after an accident
Replacement of the front bumper of a Honda Accord after an accident
Honda Accord (2008-2013 / MK 8) In this video we see how to replace the airbag of a Honda Accord after an accident. This is the easiest part, because afterwards a meticulous job mus…
How to Change the Honda Badge on the Steering Wheel of a Honda Accord
How to Change the Honda Badge on the Steering Wheel of a Honda Accord
Honda Accord (2008-2013 / MK 8) Let's see how to change the manufacturer badge on the steering wheel of a Honda Accord. If this badge is damaged from use, you can easily replace it …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos