Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Honda Badge on the Steering Wheel of a Honda Accord

Model: Honda Accord MK 8 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Manufacturer emblem

See other generations:
Video tutorial

Let's see how to change the manufacturer badge on the steering wheel of a Honda Accord. If this badge is damaged from use, you can easily replace it by following the instructions from our YouTuber; on AliExpress, this badge costs £5.39 + £0.83 for shipping.

Of course, there is an airbag in the steering wheel, so to carry out the work, disconnect the negative terminal of the battery. Keep your radio code handy.

Using a plastic spatula, pry under the badge to remove it from the steering wheel; if necessary, use pliers to take it out of its housing. Carefully remove all the supports that protrude from the steering wheel, as the new badge's supports will need to fit into these.

Then, clean the surface well; now simply press firmly so that all supports fit into the holes. Job done.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag on a Honda Accord?
How to Remove the Steering Wheel Airbag on a Honda Accord?
Honda Accord (2012-2017 / MK 9) To remove the steering wheel airbag on a Honda Accord, loosen the screws located at the back of the steering wheel, on the right side and on the left…
Oil change reset on a Honda Accord
Oil change reset on a Honda Accord
Honda Accord (2018-2023 / MK 10) In today's video tutorial, we will see all the necessary steps to perform the oil change on a Honda Accord, tenth generation model produced from 2018…
How to change the wiper blades on the Honda Accord?
How to change the wiper blades on the Honda Accord?
Honda Accord (2002-2007 / MK 7) After a certain period, the wiper blades become too worn to perform their function correctly. When you notice that the windscreen does not remain per…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos