Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Fuel Pump on Honda Civic

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel pump

See other generations:
Video tutorial

This guide outlines the procedure to remove and replace the fuel pump on a Honda Civic in simple and quick steps. First, access the rear of the vehicle and remove the rear seat to reach the pump.

Then disconnect the electrical connector and the fuel lines, as shown in the video. Next, unscrew the pump retaining ring to remove it and replace it with the new one. Now install the original replacement, then reconnect the electrical cable and the fuel line!


Updated on 16 June 2026 by ScegliAuto


Related tutorials

Removing the Fuel Pump from Honda Civic
Removing the Fuel Pump from Honda Civic
Honda Civic (2006-2012 / MK 8) In this video tutorial, learn how to remove and replace the fuel pump on a Honda Civic. First, open the boot and remove the screws from the seats at …
Where are the fuses located in the Honda Civic?
Where are the fuses located in the Honda Civic?
Honda Civic (2006-2012 / MK 8) The fuses in the Honda Civic are divided between two fuse boxes located within the vehicle. The first is found inside the cabin, in the lower left pa…
Where are the fuses located in the Honda Civic?
Where are the fuses located in the Honda Civic?
Honda Civic (2012-2015 / MK 9) All fuses in the Honda Civic are divided between two fuse boxes located inside the car: the first is situated on the dashboard, at the bottom left be…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos