Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the ABS control module in the Honda Civic?

Model: Honda Civic MK 9 - Years: 2012, 2013, 2014, 2015
Part: Control unit

See other generations:
Video tutorial

In this tutorial, see how to replace the ABS control module in the Honda Civic. First, open the bonnet, then disconnect the negative terminal of the battery and locate the module, which is situated just behind the right headlamp.

Next, disconnect the various pipes and the power connector, remove the three lower mounting bolts, and extract the module from its housing. This last operation may be difficult due to limited space; ensure not to damage the pipes during extraction and replacement.

Once everything is reassembled, top up the brake fluid and bleed any air that entered during the operation.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Change the ABS Sensor on a Honda Civic 8
How to Change the ABS Sensor on a Honda Civic 8
Honda Civic (2006-2012 / MK 8) To replace the ABS sensor on a Honda Civic 8, lift the car and remove the wheel. Remove the plastic clips securing the wheel arch lining to access th…
Disassembly and replacement of the Honda Civic's swing arm.
Disassembly and replacement of the Honda Civic's swing arm.
Honda Civic (2006-2012 / MK 8) In this guide, we will see the instructions that will allow us to disassemble and replace the control arm of the Honda Civic. First, let's lift the v…
How to replace the battery of the Honda Civic remote control?
How to replace the battery of the Honda Civic remote control?
Honda Civic (2022-2026 / FL, FE, MK 11) In this tutorial, we can see how to replace the battery of the Honda Civic remote control, a very simple and quick operation. To do this, we will onl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos