Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Fluid Reservoir on the Honda CR-V

Model: Honda CR-V MK 3 - Years 2007-2012

In this guide, we will look at the instructions necessary to remove and replace the windscreen washer fluid reservoir of the Honda CR-V. First, open the bonnet of your car and start removing the plastic clips found at the top of the front bumper to remove the panel; then use a 10 mm socket to unscrew the screws located under the bumper, as shown in the video. At this point, remove the bumper to access the washer fluid reservoir; unscrew its screws and disconnect the fluid line, replacing it with the new one!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Windscreen Wiper Pump on Honda CR-V
Replacing the Windscreen Wiper Pump on Honda CR-V
Honda CR-V (2007-2012 / MK 3) Is water no longer coming from the wipers? Learn how to remove the pump of the windscreen washer reservoir. Lift the front bonnet and remove the bump…
Replacement and Maintenance of Antifreeze
Replacement and Maintenance of Antifreeze
Honda CR-V (2007-2012 / MK 3) With the arrival of winter, it is essential to take certain precautions for your car, starting from the wheels and extending to the antifreeze. In th…
How to replace the coolant in the Honda CR-V 2.4L
How to replace the coolant in the Honda CR-V 2.4L
Honda CR-V (2012-2017 / MK 4) Today we will see the instructions that will allow us to drain and replace the cooling liquid or antifreeze of the Honda CR-V 2.4L. First, we will dr…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos