Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Honda Pilot yf2

Model: Honda Pilot YF2, YF1 - Years 2003-2008
Part: Warning light – error code

This guide shows how to reset the maintenance light on the Honda Pilot yf2. After turning on the ignition and waiting for the warning lights to turn off, press the trip odometer reset button located to the right of the speedometer until the engine oil quality percentage is displayed. At this point, hold the button for ten seconds until the message on the display starts to flash. Release the button and press it again for another five seconds until the message stops flashing and the counter resets to maximum.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2007 Honda Pilot
How to Reset the Oil Light on a 2007 Honda Pilot
Honda Pilot (2003-2008 / YF2, YF1) In this mini guide for your first-generation 2007 Honda Pilot, we will discover how to manually reset the oil light. This light automatically turns o…
Oil Maintenance Reset on a Honda Pilot
Oil Maintenance Reset on a Honda Pilot
Honda Pilot (2003-2008 / YF2, YF1) Today, let's see how to perform the maintenance reset on a Honda Pilot, specifically models produced from 2006 to 2010. Start the procedure by turnin…
What Does the "Maint Reqd" Light Indicate in the Honda Pilot and How to Remove It?
What Does the "Maint Reqd" Light Indicate in the Honda Pilot and How to Remove It?
Honda Pilot (2003-2008 / YF2, YF1) If the "Maint Reqd" light has illuminated on the dashboard of your Honda Pilot, it means it's time for a service as the corresponding interval has be…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos