Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the instrument panel in the Honda Civic?

Model: Honda Civic MK 6 - Years 1995-2001
Part: Instrument cluster

In this tutorial we can see how to disassemble the instrument panel in the Honda Civic, an extremely simple and fast operation. First of all, make sure that the key is not inserted, in order to operate safely, then, with a simple screwdriver with a cross tip, unscrew the two screws located on the upper edge of the instrument panel frame. Once the frame is separated, continue by unscrewing the additional four screws indicated, extract the panel from the dashboard and disconnect the various internal connectors. To install the replacement, simply follow the reverse procedure.

Posted on 15 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the dashboard of the Honda Civic
How to disassemble the dashboard of the Honda Civic
Honda Civic (2016-2021 / MK 10) In this guide, let's see the steps on how to disassemble and replace the dashboard of the Honda Civic; the procedure is not complex but requires a lo…
How do you reset the tire pressure light of the Honda Civic?
How do you reset the tire pressure light of the Honda Civic?
Honda Civic (2006-2012 / MK 8) The tire pressure warning light that appears on the instrument panel of the Honda Civic can be reset by turning on the instrument panel itself, inser…
How to reset the tire pressure light on the Honda Civic
How to reset the tire pressure light on the Honda Civic
Honda Civic (2022-2026 / MK 11, FE, FL) If after inflating the tires of your new Honda Civic, the corresponding warning light continues to remain on the instrument panel, then you must proc…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos