Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing and Maintaining the Exhaust

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Exhaust muffler

See other generations:
Video tutorial

This job will be much easier if you have a ramp to lift the car. Place supports under the ends of the exhaust to prevent it from falling when the bolts are undone. Use a reciprocating saw to cut the bolts securing the exhaust to the exhaust pipe of the engine, and use a hammer and punch to remove the bolts from the holes.

Now, remove the exhaust from the rubber mount, and you can take out the entire exhaust pipe. Next, remove the catalytic converter by detaching the rubber hooks that support it. Now, reposition the new exhaust, ensuring to place the gaskets where necessary.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Replacing the Key Battery on a Honda CR-V
Replacing the Key Battery on a Honda CR-V
Honda CR-V (2017-2022 / MK 5) Today, tackle a simple maintenance task: replacing the battery in the Smart Key Remote used by Honda. Press the button on the back of the key to slid…
How to Perform a Service Reset on a Honda CR-V
How to Perform a Service Reset on a Honda CR-V
Honda CR-V (2017-2022 / MK 5) On the Honda CR-V, the maintenance/oil interval reset, or service reset, is performed with the vehicle stationary and the ignition ON. From the displ…
Replacing and Maintaining Spark Plugs
Replacing and Maintaining Spark Plugs
Honda CR-V (2007-2012 / MK 3) A simple replacement that will save you time and money at the garage. Open and lift the bonnet, remove the panel covering the engine, and you will no…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos