Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing and Maintaining Spark Plugs

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Spark plugs

A simple replacement that will save you time and money at the garage. Open and lift the bonnet, remove the panel covering the engine, and you will notice the connectors supplying power to the spark plugs in the centre of the engine; simply remove them by unscrewing the bolts that hold them in place. Using a socket, unscrew the spark plugs located in the holes from which you disconnected the connectors, quite easily. Now take the new spark plugs and insert them into their housing, tightening them with the same socket used to remove the old ones. Reposition the connectors and you're done!

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Spark Plugs on Honda CR-V
Replacing Spark Plugs on Honda CR-V
Honda CR-V (2012-2017 / MK 4) Is the car having ignition problems? Let's look at replacing the spark plugs on the Honda CR-V. Open the bonnet and lift it, securing it in place. Re…
Removing Spark Plugs on Honda CR-V
Removing Spark Plugs on Honda CR-V
Honda CR-V (2002-2007 / MK 2) How to remove the ignition spark plugs on a Honda CR-V? Open the engine bay and remove the engine cover panel. Take off the cover above the cylinder …
How to Replace the Spark Plugs on a Honda CR-V
How to Replace the Spark Plugs on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) To replace the spark plugs on a Honda CR-V, open the bonnet to detach the cover on top of the engine block, under which the coils are located. Once t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos