Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Antifreeze

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Antifreeze coolant

See other generations:
Video tutorial

If possible, place the car on a ramp and locate the point to drain the fluid, which is at the centre of the lower bumper. Position a container to collect all the fluid.

To refill the fluid, remember to close the drain tube under the bumper first. Use a funnel to insert the fluid through the designated tank opening, which is slightly to the left of the right front headlamp.

Replace the cap and start the car to circulate the fluid. You can now test your air conditioning system.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacement and Maintenance of Antifreeze
Replacement and Maintenance of Antifreeze
Honda CR-V (2007-2012 / MK 3) With the arrival of winter, it is essential to take certain precautions for your car, starting from the wheels and extending to the antifreeze. In th…
How to replace the coolant in the Honda CR-V 2.4L
How to replace the coolant in the Honda CR-V 2.4L
Honda CR-V (2012-2017 / MK 4) Today we will see the instructions that will allow us to drain and replace the cooling liquid or antifreeze of the Honda CR-V 2.4L. First, we will dr…
Replacing the Stabiliser Bar Support Bush
Replacing the Stabiliser Bar Support Bush
Honda CR-V (1995-2001 / MK 1) The failure of the stabiliser bar support bush is a common fault, especially in SUVs. The replacement is straightforward but it is advisable to lift …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos