Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant in the Honda CR-V 2.4L

Model: Honda CR-V MK 4 - Years 2012-2017
Part: Antifreeze coolant

Today we will see the instructions that will allow us to drain and replace the cooling liquid or antifreeze of the Honda CR-V 2.4L. First, we will drain the antifreeze liquid by unscrewing the appropriate valve located under the engine; let the fluid drain into a container for about ten minutes, as shown in the video. At this point, we unscrew the cap of the coolant reservoir to top it up, after closing the release valve; pour the new antifreeze liquid until reaching the maximum level mark.

Posted on 25 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement and Maintenance of Antifreeze
Replacement and Maintenance of Antifreeze
Honda CR-V (2007-2012 / MK 3) With the arrival of winter, it is essential to take certain precautions for your car, starting from the wheels and extending to the antifreeze. In th…
Replacing Antifreeze
Replacing Antifreeze
Honda CR-V (2007-2012 / MK 3) If possible, place the car on a ramp and locate the point to drain the fluid, which is at the centre of the lower bumper. Position a container to col…
How to Replace the Windscreen Washer Fluid Reservoir on the Honda CR-V
How to Replace the Windscreen Washer Fluid Reservoir on the Honda CR-V
Honda CR-V (2007-2012 / MK 3) In this guide, we will look at the instructions necessary to remove and replace the windscreen washer fluid reservoir of the Honda CR-V. First, open …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos