Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Hyundai Tucson

Model: Hyundai Tucson JM, MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: Battery

See other generations:
Video tutorial

In a few simple steps, you will learn how to remove and replace the battery in the Hyundai Tucson vehicle, following the instructions below. First, open the bonnet of the car and start by removing the air intake duct located at the top right; then disconnect both battery terminals (positive and negative) by unscrewing the bracket screw to remove it from its housing, as shown in the video.

At this point, install the new battery of the correct type and with the same amperage; connect it and start the engine!


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Hyundai Tucson 3 key.
How to replace the battery of the Hyundai Tucson 3 key.
Hyundai Tucson (2015-2021 / MK 3, TL) To be able to replace the battery inside the key of your third-generation Hyundai Tucson by yourself, just follow the procedure described in this new…
How to replace the battery of the Hyundai Tucson remote control
How to replace the battery of the Hyundai Tucson remote control
Hyundai Tucson (2015-2021 / MK 3, TL) Today we will explain how to replace the battery of the Hyundai Tucson remote control. To replace the battery, we need to lift the key and insert a f…
How to Change the Battery on a Hyundai Tucson
How to Change the Battery on a Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) The instructions in this guide will show you the procedure for removing and replacing the battery on a Hyundai Tucson. First, open the bonnet of the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos