Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Hyundai Sonata?

Model: Hyundai Sonata DN8 - Years 2020-2026
Part: Service warning light

To reset the "Service" light on a Hyundai Sonata, start the instrument panel without turning on the engine. Use the controls on the steering wheel to access the vehicle's configuration system. Navigate through the available options until you find the menu dedicated to scheduled maintenance or service intervals. Select this section using the control buttons and look for the reset option. Once found, confirm the choice and hold down the necessary command for a few seconds, allowing the system to record the reset. The maintenance light will disappear from the display, indicating the completion of the procedure. To verify that the operation was successful, turn off and turn on the instrument panel, checking that the warning is no longer active. This operation updates the system parameters, preparing the car to properly monitor future maintenance intervals.

Posted on 1 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Hyundai Sonata?
How to reset the "Service" light on a Hyundai Sonata?
Hyundai Sonata (2020-2026 / DN8) To reset the "Service" light on a Hyundai Sonata, start by turning on the instrument panel without starting the engine. Use the buttons on the steeri…
How do you reset the Service light on the Hyundai Sonata?
How do you reset the Service light on the Hyundai Sonata?
Hyundai Sonata (2020-2026 / DN8) To reset the Service light on the Hyundai Sonata, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot.…
How to Reset the Service Light on a Hyundai Sonata?
How to Reset the Service Light on a Hyundai Sonata?
Hyundai Sonata (2020-2026 / DN8) To reset the Service light on a Hyundai Sonata, turn the ignition on by inserting the key into the ignition switch. Once the dashboard lights up, pre…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos