Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you adjust the handbrake of the Hyundai IX 35?

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Parking brake

Video tutorial

In this video we can see how to adjust the handbrake of a Hyundai IX35: we need to lift the cup holder on the central console upwards, which easily comes off, as it is only snapped in place. Underneath we find the adjustment screw that we can tighten as desired, using a 10 mm wrench; tightening it pulls the handbrake and loosening it releases it; normally however this job is done by tightening it, that is, by pulling it. Generally the desired result is achieved when the handbrake lever is pulled up to a maximum of three/four notches.

In this way the resolution is optimal.


Posted on 9 December 2024 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on the Hyundai IX35
How to Adjust the Handbrake on the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Today, learn how to adjust the handbrake on the Hyundai IX35. To adjust the handbrake, go to the rear seats of the vehicle and remove the cover from …
How to Adjust the Handbrake on a Hyundai IX 35
How to Adjust the Handbrake on a Hyundai IX 35
Hyundai ix35 (2009-2015 / MK 1) Learn how to adjust the handbrake on a Hyundai IX35: this is a simple and quick procedure, but it requires an assistant to hold the handbrake lever i…
How to Adjust the Handbrake on the Hyundai ix35
How to Adjust the Handbrake on the Hyundai ix35
Hyundai ix35 (2009-2015 / MK 1) Adjusting the handbrake is not as difficult as it seems; you just need the right guide to access the handbrake cable. This is the guide you need. Rem…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos