Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fog light bulb in the Hyundai Ix35?

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fog lights

This video is currently unavailable

The fog lights mentioned above are those highlighted in the images shown in the video, belonging to the Hyundai Ix35. Thanks to them, we are able to have a better view of the road in case there is fog. If we notice that the bulb of these lights is burnt out, we can proceed with the replacement ourselves, following the steps below: Open the hood, locate the protective rear cap of the fog light and remove it, then extract the bulb holder and remove the bulb from it. Test the light and reassemble everything following the reverse procedure.


Posted on 31 December 2024 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Hyundai IX35
How to Replace the Front Headlight Bulb on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In this short video, see the instructions that will allow you to remove and replace the front headlight bulb on the first-generation Hyundai IX35. Fi…
How to Reset the "Service" Light on a Hyundai IX35?
How to Reset the "Service" Light on a Hyundai IX35?
Hyundai ix35 (2009-2015 / MK 1) Before you start, sit in the driver's seat of your Hyundai IX35. Begin by activating the instrument panel by pressing the ignition button. Next, repe…
How to Replace the Position Lights on a Hyundai IX35
How to Replace the Position Lights on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In this video, you will see how to replace the position lights on the Hyundai IX35: open the bonnet of the vehicle, as it is easy to access the front…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos