Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Speed Sensor on a Hyundai Santa Fe

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: Checks and maintenance

The speed sensor is located behind the left rear wheel of the vehicle, so this is where you will perform the work. Start by lifting the vehicle with a jack and securely place axle stands. Then, unscrew the locking pins of the wheel and remove it. Remove the brake caliper to access the sensor. This should be removed after unscrewing its locking pins and tested with a multimeter to ensure it needs replacing. To finish the job, install the new sensor and reassemble everything previously removed.

Posted on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai Santa Fe (2000-2006 / MK 1) Today's guide will illustrate the necessary steps to dismantle and replace the crankshaft position sensor on the Hyundai Santa Fe 2.4L. First, open t…
Hyundai Santa Fe (2012-2018 / MK 3) In this video, see where the crankshaft position sensor is located on a Hyundai Santa Fe, useful if you need to replace it. As shown, it is located a…
Hyundai Santa Fe (2012-2018 / MK 3) This video shows where the crankshaft RPM sensor is located in the Hyundai Santa Fe and how to proceed if you need to replace it. As shown, the senso…

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos