Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Tucson
    4. : Hyundai Tucson remote control battery replacement

Hyundai Tucson - Video tutorial

Model: Hyundai Tucson JM, MK 1 - Years 2004-2009
Part: Key
Operation: Hyundai Tucson remote control battery replacement

Is the Tucson key battery dead? Do we want to replace it? Let's see how the key is removed from inside. We take the remote control key and separate the piece: we remove the back shell of the key by prying. With the help of a screwdriver we extract the discharged battery. We take a new battery and insert it into the key (of the same size and voltage). We mount the new battery, mount the protection and screw in the screws. We join the plastic of the back cover to the key. We control the operation of the Tucson remote key with its own operation buttons.


Posted on 11 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Tucson 2022-2027 - Problem with the remote control not working on the Hyundai Tucson? Read Answer
    • Tucson 2015-2021 - Why is the remote control of the Hyundai Tucson no longer recognized? Read Answer
    • Tucson 2015-2021 - Why does a Hyundai Tucson not recognize the electronic key? Read Answer
    • Tucson 2004-2009 - Where is the Hyundai Tucson remote control receiver located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos