Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of the reverse camera kit

Model: Hyundai Sonata - Years 2004-2014
Part: Accessory kit

To install the reverse camera kit, start by removing the dashboard where the monitor will be positioned. Retrieve the power cables and, following the instructions included with the kit, connect the various cables to the monitor module. Find the route in the cabin tunnel to run the video cable that will connect to the camera located at the rear. The camera installs in one of the slots designed for the number plate illumination. To install the camera, it is necessary to remove the boot panel to access the back of the light. Once the light unit is removed, install the camera and connect the video cable from the monitor, its power supply, and the power supply for the new lamp installed with the camera. Once all components are correctly positioned, turn on the monitor and check for proper operation.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of LED Reversing Light Bulbs
Installation of LED Reversing Light Bulbs
Hyundai Sonata (2004-2014 / ) To install the LED bulbs in the reversing lights, you need to remove the internal trim panel of the rear bonnet; open the bonnet and start removing t…
HID Kit Installation Procedure
HID Kit Installation Procedure
Hyundai Sonata (2004-2014 / ) The installation procedure for an HID kit involves several key steps: open the vehicle's bonnet, remove the headlamp unit cover, and extract the spar…
Where to find the fuses for the rear camera of the Hyundai Sonata
Where to find the fuses for the rear camera of the Hyundai Sonata
Hyundai Sonata (2010-2015 / YF, MK 6) In this short guide, we will see the positioning of the fuse boxes and in particular the rear camera fuse of the Hyundai Sonata. First, we open the c…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos