Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

HID Kit Installation Procedure

Model: Hyundai Sonata - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Accessory kit

See other generations:
Video tutorial

The installation procedure for an HID kit involves several key steps: open the vehicle's bonnet, remove the headlamp unit cover, and extract the spare bulb. Insert the xenon light into the headlamp housings, taking care when performing these operations.

Then proceed to insert the xenon bulbs into the headlamps. During the removal and installation of the bulbs, do not apply excessive pressure as this may damage the lighting system, and ensure that the negative and positive wires are properly connected.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Install a Xenon HID Kit
How to Install a Xenon HID Kit
Hyundai Sonata (2004-2014 / ) This tutorial explains how to install a xenon headlight kit on a Hyundai Sonata. After opening the bonnet, the headlight kit to be installed, the wir…
Installation of the reverse camera kit
Installation of the reverse camera kit
Hyundai Sonata (2004-2014 / ) To install the reverse camera kit, start by removing the dashboard where the monitor will be positioned. Retrieve the power cables and, following the…
Instructions for Wheel Replacement
Instructions for Wheel Replacement
Hyundai Sonata (1998-2005 / EF) If you need to replace a wheel, there are some precautions to avoid unpleasant inconveniences; first, under the load floor of the rear boot, you will…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos