Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of LED Reversing Light Bulbs

Model: Hyundai Sonata - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

To install the LED bulbs in the reversing lights, you need to remove the internal trim panel of the rear bonnet; open the bonnet and start removing the push clips and the fixing screws of the plastic inserts; once the cover is removed, you can access the rear lights and unclip the bulb holder to extract the old bulb and insert the new one: if it does not light up, you will need to rotate it 180 degrees as LEDs have a polarity that must be respected; then reassemble the trim to complete the installation.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light Bulb
Replacing the Rear Light Bulb
Hyundai Sonata (2004-2014 / ) Replacing the rear light bulbs is very easy as no disassembly is required: once you open the rear bonnet, you will immediately see a portion of sound…
Replacement of Cabin Ceiling Light LED Bulb
Replacement of Cabin Ceiling Light LED Bulb
Hyundai Sonata (1998-2005 / EF) Choose a new replacement bulb identical to the one being replaced. In this case, the ceiling light is fitted with an LED bulb instead of the old tubu…
Replacing the LED Bulb in the Interior Light
Hyundai Sonata (2004-2014 / ) Choose a new replacement bulb identical to the one being replaced. In this case, the interior light is fitted with an LED bulb instead of the old fil…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos