Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the LED Bulb in the Interior Light

Model: Hyundai Sonata - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Interior dome light bulb

See other generations:
This video is currently unavailable

Choose a new replacement bulb identical to the one being replaced. In this case, the interior light is fitted with an LED bulb instead of the old filament bulbs; however, both types are perfectly interchangeable without issues.

Using a plastic tool, remove the cover of the interior light to access the bulb holder, unscrew the two screws of the cover, and remove the faulty bulb. Then, refit the new bulb.

For LED bulbs, it is important to install them with the correct polarity. If the new bulb does not light up, rotate it 180 degrees and reinstall it. Close the interior light with its cover.

The same procedure can be carried out on other interior lights.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Replacement of Cabin Ceiling Light LED Bulb
Replacement of Cabin Ceiling Light LED Bulb
Hyundai Sonata (1998-2005 / EF) Choose a new replacement bulb identical to the one being replaced. In this case, the ceiling light is fitted with an LED bulb instead of the old tubu…
Replacing the Rear Light Bulb
Replacing the Rear Light Bulb
Hyundai Sonata (2004-2014 / ) To replace the bulbs in the rear light (either the indicator or the side light), you do not need to remove the light unit as you can access it from i…
Installation of LED Reversing Light Bulbs
Installation of LED Reversing Light Bulbs
Hyundai Sonata (2004-2014 / ) To install the LED bulbs in the reversing lights, you need to remove the internal trim panel of the rear bonnet; open the bonnet and start removing t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos