Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Drums and Shoes

Model: Hyundai Elantra MK 3, XD - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Brake drums and shoes

See other generations:
Video tutorial

For this operation, you will need the following tools: a 12mm socket, a set of screwdrivers, brake cleaner, and rags. First step: lift the vehicle and remove the wheel bolts and the wheel itself.

Unscrew the drum screws and remove the drum. Spray brake cleaner inside the shoe assembly and remove the retaining springs.

Remove both shoes from the bracket. Generously spray brake cleaner inside the brake.

Clean the entire inside of the brake with a brush. Unscrew the brake screws and remove all parts.

Thoroughly clean all brake components of rust, dirt, and deposits to prevent seizing. Prepare the new brake shoes.

Clean and lubricate the moving parts. Carefully reassemble all parts, including the springs in their respective guides.

Refit the remaining springs in their positions. Ensure the components move freely.

Lubricate the drum and install it. Install the return springs. Install the brake cable.

Install the brake shoe assembly and fit the cable. Install the remaining parts.

Spray more brake cleaner on the shoes and wipe with a rag. Refit the drum and ensure proper operation by pulling the brake cable. Check the operation of the handbrake.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Wheel Hub Bearing
Replacing the Rear Wheel Hub Bearing
Hyundai Elantra (2000-2006 / MK 3, XD) The rear wheel hub bearing is sold complete with the hub itself, so the replacement essentially involves disassembling the hub. Lift the vehicle on a…
Replacing the Third Brake Light on Hyundai Elantra
Replacing the Third Brake Light on Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) Hello everyone! Replacing the bulb for the third brake light on a Hyundai Elantra is really simple and very quick. To do this, simply open the boot a…
Replacement of Rear Brake Discs
Replacement of Rear Brake Discs
Hyundai Elantra (2000-2006 / MK 3, XD) Lift the vehicle and apply suitable axle stands. Then remove the wheel and the brake caliper, which must be taken off along with the pads; also remov…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos