Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Cabin air filter replacement

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 1 - Years 2000-2006
Part: Cabin air filter
Operation: Cabin air filter replacement

The passenger compartment air filter is located on the passenger side, behind the glovebox which must be removed: then unhook the flap support arms and lower it completely. Unscrew the fixing pins of the drawer (both those along the edges and those inside) and remove it: the black plastic box is the filter container and the cap is in the center. Therefore unhook the cap and extract the two filters (one upper and one lower); insert the new ones and proceed backwards for reassembly. At the end of the replacement it is suggested to sanitize the passenger compartment with a special spray.


Posted on 11 July 2023 by ScegliAuto

This video is currently unavailable


Hyunday Santa Fe cabin filter replacement
Hyundai Santa Fe (2006-2012 / MK 2) In this video we are going to see how to replace the cabin air filter on the Hyundai Santa Fe SUV. The filter is located in the position of the glove
Replacement of the cabin air filter
Hyundai Santa Fe (2006-2012 / MK 2) In this tutorial we will explain how to remove and replace the cabin air filter of a Hyundai Sanata Fe. It is located inside the glove box on the pas
Cabin air filter replacement
Hyundai Santa Fe (2006-2012 / MK 2) The passenger compartment air filter is located on the passenger side behind the glove box: in order to reach and replace it, it is therefore necessa

    Frequently Asked Questions

    • Santa Fe 2006-2012 - How much does the cabin filter on the Hyundai Santa Fe cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos