Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Hyundai Santa Fe MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located on the passenger side behind the glove compartment: to access and replace it, open the glove compartment door, detach the side strap that acts as a damper and stop, and then press the sides of the glove compartment to retract the rubber stops and fully lower the door; once you reach the air duct, you can extract the cabin air filter and remove any dirt residue inside the duct; then apply the new filter (activated carbon is recommended) following the direction of the airflow.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Hyundai Santa Fe (2000-2006 / MK 1) The cabin air filter is located on the passenger side, behind the glove compartment drawer: to perform the replacement, you need to open the door, un…
Replacing Cabin Filter on Hyundai Santa Fe
Replacing Cabin Filter on Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) In this video, you will see how to replace the cabin air filter on the Hyundai Santa Fe SUV. The filter is located in the glove compartment area (on …
Replacing the Cabin Air Filter
Hyundai Santa Fe (2000-2006 / MK 1) The cabin air filter is located on the passenger side, behind the glove compartment which must be removed: disconnect the support arms of the flap an…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos