Do it yourself
Frequently asked questions about cars and motorcycles

Battery Replacement on Hyundai Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

Lift the bonnet. First, remove the two round clips securing the battery cover by levering them with a flat screwdriver, then remove the cover itself.

Next, lift the small cover over the two terminals and disconnect them by unscrewing: remember to always start with the negative terminal and only then unscrew the positive. One 12 mm bolt at the front bottom secures the battery to the vehicle: unscrew this bolt and remove the battery.

Reverse the steps for reassembly, and you're done.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Hyundai Tucson (2015-2021 / MK 3, TL) In this tutorial video, you will learn how to fit the battery of a Hyundai Tucson, as well as other Hyundai models. After removing the old battery, i…
Hyundai Tucson (2015-2021 / MK 3, TL) In this tutorial, you will learn how to remove and replace the battery in the third-generation Hyundai Tucson in simple and quick steps. First, open …
Hyundai Tucson (2015-2021 / MK 3, TL) To change the battery on a Hyundai Tucson, start by removing the clips that hold the air tube in place, then remove the air tube. Unscrew the battery…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos