Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan on a Hyundai Santa Fe

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan on a Hyundai Santa Fe, open the glove compartment and remove the plastic cover from its upper part. To do this, you will need to loosen two screws: once the plastic cover is removed, you will have access to the fan. To remove it from its housing, loosen its fastening bolts and disconnect the relevant connector.

At this point, the old fan can be removed and replaced with a new one. Finally, reassemble everything and check its correct operation.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the 2007 Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) To locate the fuse box containing all the fuses for your 2007 Hyundai Santa Fe, follow the steps outlined in this guide. First, park the vehicle safe…
How to Replace the Air Conditioning Radiator on a Hyundai Santa Fe
How to Replace the Air Conditioning Radiator on a Hyundai Santa Fe
Hyundai Santa Fe (2000-2006 / MK 1) This guide outlines the steps to remove and replace the air conditioning radiator on a Hyundai Santa Fe, following the instructions below. First, ope…
How to Remove the Cooling Radiator from the Hyundai Santa Fe
How to Remove the Cooling Radiator from the Hyundai Santa Fe
Hyundai Santa Fe (2000-2006 / MK 1) Here are the main instructions for removing and replacing the cooling radiator on the Hyundai Santa Fe. First, open the bonnet and start removing the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos