Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Remote Key Battery on Hyundai Kona

Model: Hyundai Hyundai Various
Part: Key

Using the designated button, release the manual key from the remote. Now that the side space of the key is clear, use a flat-head screwdriver to pry in that space, as clearly shown in the video. This will allow you to remove the remote cover. Now, unscrew the internal casing with a small cross-head screwdriver and take it out. Voila! Inside this key is the battery! It is a CR2032, easily available and low-cost. Replace the battery and proceed in reverse until the remote is fully reassembled. Good luck!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai Hyundai Various Replacing the remote control battery of a Hyundai car is a simple and quick operation to be carried out independently, also thanks to our short video…
Hyundai Hyundai Various The replacement of the battery of a 2020 Hyundai Creta remote control is a really simple and quick operation to perform in less than a minute and ind…
Hyundai Hyundai Various The Kona Electric has two battery systems: the high-voltage battery for propulsion and a small 12-volt battery for lighting, wiper operation, and all…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos