Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Light on Hyundai Cars

Model: Hyundai Accent RB, MK 4, RC - Years 2010-2017
Part: Tire pressure warning light

When the tyre pressure light comes on in Hyundai cars, first check the condition and pressure of your tyres using a suitable pressure gauge. Once this is done, and if necessary, inflate the tyres, get in the car and proceed to reset. On the Hyundai Accent, for example, after turning on the instrument panel, simply press and hold the button at the top right of the buttons located to the left of the steering wheel, below the side air vent. In other Hyundai cars, the tyre pressure reset button is located in the glove compartment.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Light on Hyundai Cars
Resetting the Tyre Pressure Light on Hyundai Cars
Hyundai Accent (2010-2017 / RB, MK 4, RC) .. Resetting the tyre pressure light on Hyundai cars is really straightforward. On a Hyundai Accent, for.. …
How to Reset the Tyre Warning Light in the Hyundai Accent?
How to Reset the Tyre Warning Light in the Hyundai Accent?
Hyundai Accent (2017-2024 / YC, HC, MK 5) In this tutorial, we will see how to reset the tyre warning light in the Hyundai Accent. This simple and quick operation should only be performed aft…
How to Reset the Tyre Pressure Light on the Hyundai Accent?
How to Reset the Tyre Pressure Light on the Hyundai Accent?
Hyundai Accent (2017-2024 / YC, HC, MK 5) To reset the tyre pressure light on the Hyundai Accent, first inflate the tyres to the correct pressure: this value is indicated on the sticker attac…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos