Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Bulb on Hyundai Kona

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light

See other generations:
Video tutorial

Open the boot lid and unscrew the two screws that secure the rear light. Detach the light from its housing and disconnect the connector by pressing the appropriate tab and not pulling (never do this) on the wires.

The bulb will come out with the connector, leaving you with just the light housing. Place the light in the boot and proceed to unscrew the bulb from the connector, then insert the new one you purchased.

Refit the bulb-connector assembly into the light and reattach the light to the bodywork by screwing in the two securing screws.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on the Hyundai Kona
How to Replace the Front Headlight Bulb on the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Replacing the front headlight bulb on your Hyundai Kona is a relatively simple task, and with the following mini guide, you will complete it without …
How to replace the rear turn signal bulb of the Hyundai Kona
How to replace the rear turn signal bulb of the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) These short and simple steps will show us how to disassemble and replace the rear turn signal bulb of the Hyundai Kona. First, we open the rear door …
Replacing the Headlight Bulb on the Hyundai Kona
Replacing the Headlight Bulb on the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Today, you will see the procedure that will allow you to remove and replace the headlight bulb on the Hyundai Kona. First, open the bonnet and start …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos