Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Venue
    4. : How to change the engine oil and its filter on Hyundai Venue Mk1

Hyundai Venue - Video tutorial

Model: Hyundai Venue MK 1 - Years 2019-2024
Part: Engine oil
Operation: How to change the engine oil and its filter on Hyundai Venue Mk1

The guide shows how to replace the engine oil and relative filter of the Hyundai Venue Mk1. The first operation to carry out is to open the cap of the engine oil tank and the stick for measuring the level of the same. Having raised the front part of the vehicle, place a special container on the right of the vehicle to collect the used oil and unscrew the 17 mm bolt and drain the fluid. Using a 24 mm wrench, unscrew the oil filter housing, located in the front part of the vehicle; pay attention to possible oil leaks. Remove the old cartridge after disconnecting the locking pin and install the new cartridge by locking it in place and the new gasket. Put everything back in place and fill the tank; before taking the road, let the engine idle so that the oil circulates.


Posted on 16 May 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos