Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Hyundai IX35

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car stereo

Video tutorial

This guide shows how to remove the radio from the Hyundai IX35. Using plastic trim tools, you need to remove the plastic finishing cover located on top of the radio. At this point, you can unscrew the two fixing screws of the radio.

With the plastic trim tools, pry on the hazard switch panel to remove it. Unscrew the other two fixing screws. Now you can slide the radio out of its housing.

During this operation, be careful not to pull too hard on the device to avoid damaging the electrical cables. Reassembly is the same as disassembly but performed in reverse.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Hyundai IX35
How to Remove the Radio from a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Before you begin, sit in the driver's seat of your Hyundai IX35. Start by prying off and removing the upper cover of the radio using a thin but sturd…
How to Install an Android Car Radio in the Hyundai Ix35
How to Install an Android Car Radio in the Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) In this video tutorial, you will see the procedure to dismantle and replace the original car radio with an Android one in the Hyundai Ix35. First, di…
How to Remove the Car Radio in a Hyundai IX35?
How to Remove the Car Radio in a Hyundai IX35?
Hyundai ix35 (2009-2015 / MK 1) Removing the car radio in a Hyundai IX35 is a very simple and quick operation; let's see how to proceed in this tutorial. First, ensure the key is no…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos