Do it yourself
| ||||
|
Hyundai Tucson - Video tutorial
Model: Hyundai Tucson
MK 3, TL
- Years 2015-2021 In this video tutorial we can see how it is possible to perform the service on Hyundai Tucson. The service must be done with a warm engine. To do this we need two socket wrenches: one 27 for the oil filter cap and one 17 to unscrew the oil drain plug. Lift the car with a mobile bridge or a hydraulic jack and place safety stands under the vehicle. Lift the engine hood and secure it, now with a 27 socket wrench, we must remove the oil filter cap, turning counterclockwise, and remove the filter; check the gasket and replace it if necessary. Oil the gasket and reinsert the filter in its seat. Remove the panel below to access the oil pan. Place a container for the used oil under the oil pan; unscrew the oil drain plug with a 17 mm wrench, wait for all the oil to drain into the container. In the meantime, check the cap if it is defective, replace it with a new one, change the washer as well. Once all the oil has flowed out, reposition the oil cap without overtightening (a quarter of a turn). Now we need to lower the car and top up the engine oil (5W-30) with the help of a funnel; check the level with the special dipstick.
Posted on 9 July 2022 by ScegliAuto
How to reset the service light on the Hyundai Tucson 2.
Hyundai Tucson (2010-2015 / LM, MK 2) If you own a Hyundai Tucson Mk2 and notice the service light on the dashboard even though you have already had a regular service, then you need to pr
How to reset the service light on a Hyundai Tucson?
Hyundai Tucson (2022-2024 / MK 4, NX4) In this tutorial, we can see how to reset the service in the Hyundai Tucson, an extremely simple and fast operation. Before doing so, make sure that
How to reset the service in the Hyundai Tucson?
Hyundai Tucson (2022-2024 / MK 4, NX4) In this tutorial, we can see how to reset the service in the Hyundai Tucson, an extremely simple and fast operation, to be carried out only once all Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |