Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Kona
    4. : How to reset the service light on the Hyundai Kona

Hyundai Kona - Video tutorial

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Instrument cluster
Operation: How to reset the service light on the Hyundai Kona

In this our new mini guide dedicated to your Hyundai Kona (2017-2022) we will describe the various steps necessary to manually reset the service light that comes on steadily on the car's dashboard. First turn on the ignition and press the menu button located on the right side of the steering wheel. Immediately after, navigate to it, enter the settings and select the "Service Interval" item. At this point all that remains is to hold down the "OK" button for a few seconds. When the reset is complete, release the button and exit the on-board computer menu.


Posted on 28 September 2022 by ScegliAuto



How to reset the "Service" indicator on a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) Good morning, the purpose of this guide is to reset the "Service" light on our Hyundai Kona. Start the car's instrument panel by pressing the ignitio
How to reset the service light on the Hyundai Kona.
Hyundai Kona (2017-2023 / MK 1) To correctly complete the manual reset of the service light on your Hyundai Kona, it is necessary to follow a procedure identical to that already use
How to reset the service light on the Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) In this tutorial we can see how to reset the service in the Hyundai Kona, an extremely simple and quick operation, to be carried out only once all sc

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos