Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Radiator on a Hyundai Getz

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Heater core

Here are the main steps to remove and replace the heating radiator in the cabin of a Hyundai Getz. First, get inside the vehicle on the passenger side and start by removing the glove compartment; then open the bonnet and remove the plastic cover at the top by disconnecting the radiator fluid pipes, as shown in the video. Now, unscrew the bolts of the radiator bracket, disconnect the pipes next to it to remove it; install the new radiator and top up with new fluid!

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
Where are the fuses located in the Hyundai Getz?
Where are the fuses located in the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) The fuses of the Hyundai Getz are divided into specific fuse boxes that are installed on the vehicle: in this type of vehicle it will be possible to …
How to replace the front suspensions of the Hyundai Getz
How to replace the front suspensions of the Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Today's main instructions will show us how to disassemble and replace the front shock absorbers of the Hyundai Getz. First, we open the hood of the c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos