Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Cruz
    4. : How do you replace the headlight bulb on your Hyundai Santa Cruz?

Hyundai Santa Cruz - Video tutorial

Model: Hyundai Santa Cruz MK 1 - Years 2021-2024
Part: Headlight bulb
Operation: How do you replace the headlight bulb on your Hyundai Santa Cruz?

In order to be able to replace the headlight bulb on the Hyundai Santa Cruz, you need to loosen the screws located inside the wheel arch corresponding to the bulb to be replaced. Once these screws have been removed, it will be possible to detach the wheel arch, so that you have access to the rear part of the headlight: here will be the connector that must be disconnected, so that the bulb inside can be removed from its housing. After removal, it will be possible to connect the new one to the connector, inserting it inside the headlight and closing everything with the wheel arch.


Posted on 26 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos