Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Air Filter

Model: Hyundai I20 MK 1, PB - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

The car model in question has a cabin air filter made up of two overlapping panels located just behind the centre tunnel console. Access the filter housing from the passenger side, just below the glove compartment: release the retaining clip of the filter cover to remove it and then extract the two panels that make up the cabin air filter.

Once the old ones are removed, ensure there are no dirt residues inside the housing and insert the new panels (activated carbon filters are recommended), first the upper one and then the lower one.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

How to replace the cabin filter in the Hyundai i20
How to replace the cabin filter in the Hyundai i20
Hyundai I20 (2008-2014 / MK 1, PB) In this video tutorial, you will see how to replace the cabin filter in the Hyundai i20 by following a few simple steps: the first thing you need to …
Fuses of a Hyundai I20
Fuses of a Hyundai I20
Hyundai I20 (2014-2020 / GB, MK 2) Have you experienced malfunctions on your second-generation Hyundai I20, due to the failure of one or more fuses? Well, you are in the right place, b…
What is the Fuse Diagram for the Hyundai i20?
What is the Fuse Diagram for the Hyundai i20?
Hyundai I20 (2014-2020 / GB, MK 2) In this video, you can see the fuse diagrams for the Hyundai i20 and where the respective boxes are located, useful if you need to check the fuse for…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos