Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : How to replace the battery of a Hyundai Santa Fe

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 2 - Years 2006-2012
Part: Battery
Operation: How to replace the battery of a Hyundai Santa Fe

In this video tutorial, we can learn how to replace the battery of a Hyundai Santa Fe car. The first thing to do is to open the engine compartment and then the hood, securing it with the appropriate rod. At this point, locating the position of the battery will be very easy, as we will see it placed on the right in the compartment. To proceed with the removal of the battery, lift the cover cap of the terminal clamping bolts and remove them in order to disconnect the terminals. It is recommended to use an electric screwdriver to speed up the operation. At this point, unscrew the nuts at the base of the bracket in which the battery is fixed and proceed with its extraction. Insert the new battery into the appropriate seat, connect the terminals and secure them again with the nuts. Finally, secure the battery to the underlying bracket with the appropriate nuts.


Posted on 30 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos